For front chainring and pedals

1/2", FSA Mega Evo

1/2", FSA Mega Evo

Chain wear indicator. Fits...

Chain wear indicator. Fits 5-13 speed chains, including SRAM Flattop, T-Type, Shimano 12-speed and other types of chains. 5-10 speed chains should be replaced at 0.75% mark, 11-13 speed at 0.5%, 1-speed at 1%.

two 15 mm openings set at...

two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position, bottle opener, extra long, 350 mm

used with pedal taps...

used with pedal taps 1695.1AR, 1695.1AL, 1695.1 and 1695.2

tapered thread crank...

tapered thread crank puller, to remove cranks with damaged inner threads when the crank cannot be removed with a normal crank puller

Standard, Shimano Octalink...

Standard, Shimano Octalink and Isis crank puller with handle

Crank puller for standard...

Crank puller for standard square, Octalink and ISIS crankarms

Wrench for front chain ring...

Wrench for front chain ring nuts

right side, inner dimension...

right side, inner dimension 9/16" x 20 TPI, outer dimension 5/8" x 24 TPI

Pedal taps, 5/8" x 24 TPI,...

Pedal taps, 5/8" x 24 TPI, right side, is used for cutting new left threads before inserting right pedal thread inserts

left side, inner dimension...

left side, inner dimension 9/16" x 20 TPI, outer dimension 5/8" x 24 TPI

Pedal taps, 5/8" x 24 TPI,...

Pedal taps, 5/8" x 24 TPI, left side, is used for cutting new left threads before inserting left pedal thread inserts

Pedal axle removal tool

Pedal axle removal tool

Crank puller for square...

Crank puller for square crankarms

Crank puller for standard...

Crank puller for standard square crankarms, with 15 mm open end wrench

For standard square and...

For standard square and ISIS cranks

Full set for crank pedal...

Full set for crank pedal thread repair

9/16" x 20 tpi

9/16" x 20 tpi