Imenza Importas

1 LED, 3 modes, runs 50-100...

1 LED, 3 modes, runs 50-100 hours, 2 x CR2032 batteries, black, SL-LD160 F/R

Analog wireless,...

Analog wireless, CR2032+CR1616 batteries, 7 functions, black, CC-RS100W

86.5/89.5/92 mm case width,...

86.5/89.5/92 mm case width, 41 mm case diameter, 22/24 mm axle

160.8 mm x 100 mm, square...

160.8 mm x 100 mm, square taper, BSA, Fat Bike

28.6 mm, aluminium steel

28.6 mm, aluminium steel

For 1x narrow wide...

For 1x narrow wide chainring, square, 175 mm, 104 mm BCD. No chainring included

For 28.6-38.1 steerer, 30.2...

For 28.6-38.1 steerer, 30.2 x 41.8 x 7; 40 x 52 x 7; bearing O.D. 41/52 mm, crown cone 39.8 mm, height 5.5 mm, ACB Bearing 45° x 45°, sealed bearings

For 28.6 - 38.1 mm steerer,...

For 28.6 - 38.1 mm steerer, bearing O.D. 41.8/51.8 mm, crown cone 39.8 mm, height 8.6 mm, ACB upper 45° x 45°, ACB lower 36° x 45°, sealed bearings

For 28.6 mm - 35 mm mm...

For 28.6 mm - 35 mm mm steerer, bearing O.D. 41.8/46.8 mm, crown cone 33 mm, height 9.4 mm, ACB Bearing 45° x 45°, sealed bearings

For 28.6 mm steerer,...

For 28.6 mm steerer, bearing O.D. 41.8 mm, crown cone 30 mm, height 16.4 mm, ACB Bearing 45° x 45°, sealed bearings

16-20" bikes, steel stay,...

16-20" bikes, steel stay, plastic rim, rubber tire

Handlebar mount 31.8 mm,...

Handlebar mount 31.8 mm, QR, 35 x 26 x 25 cm, up to 5 kg, steel, black

6 glueless patches, sand...

6 glueless patches, sand paper, 2 plastic tire levers

14G x 12 mm steel nipples,...

14G x 12 mm steel nipples, 144 pcs, steel

Single speed, 1/2 x 1/8,...

Single speed, 1/2 x 1/8, 112L, 8.6 mm, Snap-on

single speed, 1/2 x 1/8,...

single speed, 1/2 x 1/8, 8.6 mm, rustproff, 40 SnapOn connectors

single speed, 1/2 x 3/32, 112L

single speed, 1/2 x 3/32, 112L

Missing link tool, tire levers

Missing link tool, tire levers